Ozone OC-1 Repair

matte.sun

Boat was scraped a bit over barnacles during race this weekend- through the paint and exposed carbon.
Does anyone have any recommendations on how to repair and which materials to use?
Thanks!

Attachment	Size
image1.JPG	1.38 MB
image2.JPG	1.51 MB
image3.JPG	1.79 MB

Submitted by matte.sun on Mon, 10/24/2016 - 6:13pm

joe

Matte,
Brian, the production manager at Ozone is super helpful. He's Mike Giblin's brother in law. Try http://outriggerzone.com/support

#1 Fri, 11/04/2016 - 10:20am

bigaka

Minor damage, though it may suck in some water.
Thickened resin will make a nice patch.
Sand lightly first with a 150 grit sand paper. The tape the area and apply the resin.
Re sand with 220 softly, to remove edges. Then use 320. 400 600 and polishing compound for shine.
If you use pigments you could perfectly match the color!
Good luck
Oscar

#2 Thu, 11/10/2016 - 4:47am

matte.sun

Thanks for everyone for the help!
If anyone is looking to do touch ups with exact color matches with their Ozone boats, Ozone is now selling paint pens:
http://outriggerzone.com/product/paint-pen/

#3 Fri, 12/02/2016 - 6:06pm

tsuinami

Nice. Any dealers on the mainland US? They're charging 20 bucks for shipping on a $9 pen.

#4 Mon, 12/26/2016 - 11:36am