Seat Velcro
I have found that contact cement does not hold up....tried Goop (very sticky silicone based glue) and never had a problem on either the seat surface or a cleaned and prepped deck surface.
#1 Thu, 11/09/2017 - 3:41pm
5 min epoxy. just make sure you scuff up both sides with sand paper so it bonds well.
use masking tape to keep the glue in a nice area.
#2 Fri, 11/10/2017 - 4:04am
Aloha, I am rehabbing a Kamanu Composites Kainalu and the seat Velcro is toast.
can someone recommend an appropriate glue for sticking down the replacement Velcro strips?
mahalo in advance,
Submitted by Openocean on