Rudder for a Mako6 surfski
Rachel,
The best thing you could have done for the boat is lose that stock rudder .. Those things are horrible !!!
I do not know Brian other than from reading on this forum ...
Does he mold (copys) other foils and then sells them ??? ... Is that how you got "Epic mold" ???
The old style Trapezoidal Epic rudders were nothing great. Not to mention the aluminum shaft that corroded in place or the hollow, don't-set-it-down-too-hard-or-it-will-bend, genius spec-ed one.
The new elliptical one is pretty nice if thats the one you mean. I would go for that.
aloha,
pog
#2 Wed, 03/10/2010 - 5:58pm
Brian's work is foiled fiber glass. Bring him your trashed one and he'll draw a template if he doesn't have it already. I know he likes seeing how the post angle relates to the hull. I'm almost certain my verbage is wrong, in any case be prepared to bring your boat out to Velzyland. Ask Guy Pere, Doug Lock, Brian Rocheleau, Mike Judd, Dale Hope, Todd Bradley, etc. It's worth the $100.00.
#3 Wed, 03/10/2010 - 9:38pm
Hi Guys,
Anybody have his number ??
100 is a great price. Especially if he fits it up to the hull right. Those Fenn rudders are really subpar and do not do justice to the nice hull shapes. Twisted, bents, crooked etc... no two are alike. Hard to believe people settle for these things. Sorry, pet peeve.
aloha,
pog
#4 Wed, 03/10/2010 - 10:58pm
Hey Rachel,
Yep, I had a custom rudder on my old Mako6 - made a huge difference to the handling of the ski.
(My Mako Elite came with the same shape stock rudder and I have installed a custom rudder on it too.)
The shape is elliptical with a proper airfoil section - much fatter than the flat Fenn rudder. The size is a little smaller than the Epic surf rudder (as fitted to the V10 and V12) but is similar in shape.
Regards
Rob Mousley
www.surfski.info
#5 Thu, 03/11/2010 - 12:50am
Eh Rob,
Cruising the Outrigger forum ??? Welcome over ...
Anyone reading this check out Robs baby www.surfski.info lots of great info and videos of the 'other' side.
aloha,
pog
#6 Thu, 03/11/2010 - 9:28am
It's about time the surfski paddlers catch up with outrigger paddlers and go rudderless.
#7 Thu, 03/11/2010 - 10:50am
Rudderless surfski division on the Big Island .... "win" everytime : ) : )
aloha,
pog
#8 Thu, 03/11/2010 - 10:56am
Yes, its a pleasure seeing Rob on here - done a great job with the surfski.info site, the equipment reviews, race coverage, athlete profiles etc and between your site and Keizo's OCpaddler, theres a great wealth of information to be shared within the paddling and kayaking community!
I should add, Rambo's videos of races from various places been a nice addition to the mix!
Getting back to the original topic - thanks Rachel for sharing the info on Brian Bills! Need to get a new rudder as well!
#9 Thu, 03/11/2010 - 11:00am
Whether surfski or OC-1, it is just practical to have extra rudders available during low tide season. Especially when it gets dark fast, and you no can "look so good." Worse though when you not only bust your rudder, but also scrape up your hull too. Auwe!!
#10 Thu, 03/11/2010 - 11:08am
Now I understand: $100.00 for a custom rudder means I furnish the shaft? Right? If I don't furnish the shaft, then how much more I got to pay?
#12 Thu, 03/11/2010 - 8:43pm
Bring a new shaft that you know is to size or bring your existing one. Brian Bills is strictly North Shore fiberglass action.
#13 Thu, 03/11/2010 - 8:59pm
sam from nac makes rudders and he does a very good job he makes a variety of them and he can mail you them if needed his info is
[email protected]
#16 Sun, 03/14/2010 - 3:54pm
Surfski without a rudder? C'mon...
Even the Tahitians don't paddle the surfski without rudder. Without the ama you simply could not control a ski in any kind of bumps, would just spin out if you dropped into a bump. Nor can you use a wing blade to steer the boat. It would simply be foolish.
Brian made me a custom rudder for my Mako XT. Went big (11" length), but it was not straight, it was slightly swept back. Worked way better than the little rudder that came stock with that boat.
#17 Tue, 04/20/2010 - 9:51am
Last week I did something dumb and busted the rudder on my surfski, so I need to find myself a new one.
I know that many people who paddle the Fenn Mako6 have changed out their rudders to a bigger one that can handle rough conditions better. If any of you are reading this, do you still have your old one laying around? Can I buy it off of you? (I am on Oahu.)
I will probably end up having someone build a new larger one for me around the shaft of my old one, but am looking for the quickest way to fix my boat so that I can get back on the water.
Mahalo.
Submitted by rachel on