Seat Foam

does anyone know where to get seat foam on oahu? i have a seat that i need to build up on the sides. or i want to shape it myself. any thoughts to where i can purchase a piece from.

Submitted by nalunutz on Thu, 06/18/2009 - 9:25am

Try that place out by the airport (Fiberglass Hawaii?). About a year ago, I bought a 4X6 sheet that's about 2 inches thick from them for about $70+. The scraps I use to insulate the a/c units around the house.

#1 Thu, 06/18/2009 - 11:37am

Try or all Chris1 858-337-1190 he should be able to send you one 4 x18x18 or ( with Jude 1-916-730-5833.

#2 Thu, 06/18/2009 - 12:30pm

That sheet of gray foam was 4.5 ft. by 6 ft. and 2 inches thick. Just think how many $100+ seats you can make for less than what it cost for one lousy seat? Of course you got to cut, glue, shape and smooth it to size.

#3 Thu, 06/18/2009 - 8:29pm

Jude Turczynski - Customer Service, Sales, R&D, Owner
Cell: (916) 730-5833

Minicell: 4" x 16" x 16" Block
Grey Minicell foam block, measures 4" x 16" x 16" - A firm, light weight and buoyant (closed-cell) foam. The blocks can be cut, shaped and sanded to make what you require. Contact cement or Velcro to fasten it to wherever you need. Uses: custom seats, special padding and cockpit shimming, GPS instrument and race

#4 Thu, 06/18/2009 - 9:56pm

Fiberglass Hawaii sometimes have the 4 inch thick, 4 feet x 6 feet block in stock for around $140. I remember Eckhart mentioned it in another thread about where to get seat foam from.

I actually got my foam block to make my Mantra seat from Back when I got it, they use to sell a 4" x 16" x 24" block of foam on their website. That foam they have is in my opinion much better quality than the other stuff I've seen around.

#5 Thu, 06/18/2009 - 10:56pm

On Oahu not sure ...

But good mail order with free shipping.


#6 Thu, 06/18/2009 - 11:44pm

yups bought a whole sheet from fiberglass hawaii. I think I've used like 1/20 of it.

#7 Fri, 06/19/2009 - 12:04pm

Maybe nalunutz need to contact you for a chunk of what you have left.

#8 Fri, 06/19/2009 - 10:07pm

Please register or login to post a comment.

Page loaded in 0.171 seconds.